av久久久-av九九九-av九九-av激情网-欧美三级在线-欧美三级一区二区三区

Motion Study

2013-06-22  by:廣州有限元分析、培訓中心-1CAE.COM  來源:仿真在線

Motion Study Properties PropertyManager

Animation

Frames per second. This value, multiplied by the length of the animation, specifies the total number of frames that are captured. This value does not affect the playback speed.

Basic Motion

Frames per second. This value, multiplied by the length of the animation, specifies the total number of frames that are captured. This value does not affect the playback speed.

Geometry Accuracy. Basic Motion makes meshes out of curved geometry. The higher the accuracy, the closer to actual geometry the mesh becomes. This makes collision simulation more accurate, but requires more time to compute.

3D Contact Resolution. Controls the allowed amount of  penetration within geometric meshes. Lower settings allow more penetration within the mesh. Using 3D Contact produces smoother motion, especially in tight-fit situations. For example, you can include 3D Contact information before calculating the  smooth motion of a ball rolling in a channel that has very little clearance.

Motion Analysis

Frames per second. This value, multiplied by the length of the animation, specifies the total number of frames that are captured. This value does not affect the playback speed.

Animate during simulation. Clearing this option speeds up the calculation time and prevents the graphics from displaying the motion during calculation of the simulation.

Replace redundant mates with bushings. This option converts every mate in the assembly into a bushing. In most cases, this increases the required calculation time.

Bushing Parameters. After selecting Replace redundant mates with bushings, click Bushing Parameters to change the stiffness and damping for all bushings that replace redundant mates.

Display results graphics as wireframe.

3D Contact Resolution. SolidWorks Motion typically represents shapes as many-sided polygons. The higher the number of sides, the more closely SolidWorks Motion approximates the actual geometry. However, this increases the required calculation time when you introduce 3D Contact.

Use Precise Contact. Select to calculate contact using the equations that represent the solid bodies. Clear to calculate contact approximately using the geometry of many-sided polygons. When you select Use Precise Contact, the computed contact is analytically correct, but the computation can take longer than an approximate solution.

Accuracy. Higher values increase the required calculation time.

Plot Defaults. Set definitions for the plot display.

Advanced Options. Additional options for advanced users.

General Options

Use these settings as defaults for new motion studies. When you select this option before closing the Motion Study Properties PropertyManager, the settings are applied as defaults for each motion study you create.

Show all Motion Analysis solver messages. Select this option to show messages during Motion Analysis study computations.


開放分享:優質有限元技術文章,助你自學成才

相關標簽搜索:Motion Study  SolidWorks培訓課程 SolidWorks設計教程 SolidWorks視頻教程 SolidWorks軟件下載 SolidWorks在建筑室內設計工業設計的應用 SolidWorks基礎知識 SolidWorks代做 Fluent、CFX流體分析 HFSS電磁分析 Ansys培訓 Abaqus培訓 Autoform培訓 

編輯
在線報名:
  • 客服在線請直接聯系我們的客服,您也可以通過下面的方式進行在線報名,我們會及時給您回復電話,謝謝!
驗證碼

全國服務熱線

1358-032-9919

廣州公司:
廣州市環市中路306號金鷹大廈3800
電話:13580329919
          135-8032-9919
培訓QQ咨詢:點擊咨詢 點擊咨詢
項目QQ咨詢:點擊咨詢
email:kf@1cae.com




主站蜘蛛池模板: 吸痰护理ppt课件| 黑暗之心电影完整在线观看| 末代皇帝陈道明| 牵牛花的生长变化记录| 激情豪放女| 所求皆所愿| 好好的电影| 陈慕义| 八下数学练习册答案| 黄视频在线网站| 下巴有个凹陷| 中女| 国产伦理女村支书| 长靴靴虐视频vk| 小学生必用头像| 救急战队| bb88| 富贵黄金屋国语| 红海行动2免费看完整版| 凌晨晚餐| 孙源| 拼音表| 陈牧驰个人资料简介图片| 《可爱的小鸟》阅读答案| 聊斋花弄月普通话版免费| 梁美京| 赏金猎人日本电影完整版| 假男假女| 来自地狱| 小头儿子大头爸爸| 日本尻逼| 叶子楣作品| cctv16体育台节目表| 黑木美纱| 中国文化信息协会素质文化专业委员会| 石隽| 防冲撞应急处置预案| 国内自拍99| 碧海情天 电视剧| 周杰伦雨下一整晚歌词| 胖猫图片|